LT Security LTD2432MD - Manual (Page 39)

DVR User Manual
33
Fig 4-26 alarm configuration-video loss
4.5.4 Other alarm
Step1: enter into system configurationother alarm; refer to Fig 4-27:
Disk full: user can choose the capacity of the disk storage
and select the related alarm. If the disk is full, the system
will alarm according to the setup.
IP conflict: if there is an IP address conflict within the same
network, the device will alarm after user selects buzzer and
the channel to alarm out.
Disconnect: if the disconnect happens, the device will the
device will alarm after the user selects buzzer and the
channel to alarm out.
Disk Warning: if the disk reduces, the system will send
email to the designated mailbox or alarm to notify the
reducing information after the user has selected the
corresponding function.
Fig4-27 other alarm
Step 2: select a hard disk in the pull down list box. When the disk capacity is lower than that value, there will appear some text
information on the lower right of the live image.