LT Security IPPTZ762 - Manual (Page 39)

User Manual of IR Network Speed Dome 38
You are allowed to draw up to 24 areas on the same image.
5.7 Configuring Smart Tracking
Purpose:
The speed dome tracks the moving objects automatically after you configure this
function.
Steps:
1. Enter the Smart Tracking Settings interface:
Configuration > Advanced Configuration> PTZ > Smart Tracking
Figure 5-12 Configure Smart Tracking
2. Check the check box to enable smart tracking function.
3. Click the PTZ buttons to select an object.
4. Click to set the current zoom ratio as the tracking zoom ratio.
5. Set the tracking duration. The speed dome stops tracking when the duration time
is up. The duration ranges from 0 to 300 seconds.