LT Security IPPTZ762 User Manual

Page 46

Advertising
background image

User Manual of IR Network Speed Dome

45

Figure 6-7 TCP/IP Settings

2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet

Mask and IPv4(IPv6) Default Gateway.

3. Click

to save the above settings

.

 If the DHCP server is available, you can check

to automatically obtain an IP

address and other network settings from that server.

 The valid value range of Maximum Transmission Unit(MTU) is 500 ~ 9676. The default

value is 1500.

 The Multicast sends a stream to the multicast group address and allows multiple clients

to acquire the stream at the same time by requesting a copy from the multicast group
address.

Before utilizing this function, you have to enable the Multicast function of your router
and configure the gateway of the network speed dome.

 If the DNS server settings are required for some applications (e.g., sending email), you

should properly configure the Preferred DNS Server and Alternate DNS server.

Figure 6-8 DNS Server Settings

Advertising
This manual is related to the following products: