LT Security IPPTZ762 - Manual (Page 42)

User Manual of IR Network Speed Dome 41
MULTICAST: It’s recommended to select the protocol type to
when using the Multicast function. For other information about Multicast,
refer to Section 6.3.1 Configuring TCP/IP Settings.
 Live View Performance: Set the live view performance to Least Delay,
Balanced or Best Fluency.
Please set Live View Performance as Best Fluency for the high frame rate speed
dome.
 Rules: You can enable or disable the rules of dynamic analysis for motion
here.
 Record File Settings: Set the saving path of the video files.
 Record File Size: Select the packed size of manually recorded and downloaded
video files. The size can be set to 256M, 512M or 1G.
 Save record files to: Set the saving path for the manually recorded video files.
 Save downloaded files to: Set the saving path for the downloaded video files
in interface.
 Picture and Clip Settings: Set the saving paths of the captured pictures and
clipped video files.
 Save snapshots in live view to: Set the saving path of the manually captured
pictures in interface.
 Save snapshots when playback to: Set the saving path of the captured
pictures in interface.
 Save clips to: Set the saving path of the clipped video files in
interface.
You can click to change the directory for saving video files, clips
and pictures.
3. Click to save the settings.
6.2 Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time which can be
displayed on the video. There are Time Zone, Time Synchronization, Daylight Saving
Time(DST) functions for setting the time. Time Synchronization consists of auto
mode by Network Time Protocol(NTP) server and manual mode.