LT Security IPPTZ762 - Manual (Page 56)

User Manual of IR Network Speed Dome 55
2. Configure the FTP settings, including server address, port, user name, password,
directory and upload type.
 Setting the directory in FTP server for saving files:
In the Directory Structure field, you can select the root directory, parent
directory and child directory.
 Root directory: The files will be saved in the root of FTP server.
 Parent directory: The files will be saved in a folder in FTP server. The
name of folder can be defined as shown in following Figure 6-21.
Figure 6-21 Parent Directory
 Child directory: It is a sub-folder which can be created in the parent
directory. The files will be saved in a sub-folder in FTP server. The name of
folder can be defined as shown in following Figure 6-22.
Figure 6-22 Child Directory
 Upload type: To enable uploading the captured picture to the FTP server.
3. Click to save the settings.
If you want to upload the captured pictures to FTP server, you also have to enable
the continuous snapshot or event-triggered snapshot in Snapshot interface. For detailed
information, please refer to the Section 7.3 Configuring Snapshot Settings.
6.3.9 Configuring NAT Settings
 UPnP
Universal Plug and Play (UPnP) is a networking architecture that provides
compatibility among networking equipment, software and other hardware devices.
With the UPnP function enabled, you don’t need to configure the port mapping for
each port, and the camera is connected to the Wide Area Network via the router.
Steps:
1. Enter the UPnP settings interface.
Configuration >Advanced Configuration > Network > NAT
2. Check the Enable UPnP checkbox
3. Add a Friendly Name.