LT Security IPPTZ762 - Manual (Page 63)

User Manual of IR Network Speed Dome 62
 Dynamic Tracking: The center area of the tracking scene is specified ROI function
by default. When the speed dome starts smart tracking, the quality in the image
center is enhanced.
Steps:
1. Check the check box of Enable under Dynamic Tracking.
2. Adjust the Enhance the level from 1 to 6. The higher the value, the better the
ROI quality.
3. Click Save to save the settings.
6.5 Configuring Image Settings
6.5.14 Configuring Display Settings
Purpose:
You can set the image quality of the speed dome, including brightness, contrast,
saturation, sharpness, etc.
 The parameters in Display Settings interface vary depending on the models of speed
dome.
 You can double click the live view to enter full screen mode and double click it again to
exit.
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the speed dome.