Alcatel-Lucent Omni 6624 - Manual (Page 55)

OmniSwitch 6600 Series Chassis and Hardware Components Installing MiniGBICs
OmniSwitch 6600 Series Hardware Users Guide April 2004 page 2-35
Installing MiniGBICs
Each OS6600-GNI-U2 uplink module supports up to two MiniGBICs on OmniSwitch 6624, 6600-U24,
and 6648 switches. These MiniGBICs are packaged separately and therefore are not factory-installed. You
can install the MiniGBIC(s) by following the steps below:
Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding
strap, or by grounding yourself properly. Static discharge can damage the MiniGBIC, as well as the switch
and uplink module.
1 Holding the MiniGBIC by its sides, carefully slide it into the desired MiniGBIC slot in the OS6600-
GNI-U2 module on OmniSwitch 6624, 6600-U24, and 6648 switches, as shown.
Inserting the MiniGBIC (OS6648 Shown)
Note. The MiniGBIC should slide in easily. Do not force the MiniGBIC into the slot. Otherwise you can
damage the connectors. If any resistance is encountered, ensure the MiniGBIC is aligned and oriented
properly, as shown in the diagram above.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
EX PA NS IO N/ STA CK IN G
EX PA NS IO N 49
50
5 1
5 2
TM OmniSwitch
6624
OK 1 OK 2 PS 1 PS 2 PR I
SE C TE MP FA N
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
25
26
CO NS OL E
SE L
EXP
AN
SIO
N/
STA
CK
IN G
5 1
5 2