Alcatel-Lucent Omni 6624 User Manual
Page 78
Viewing Basic Chassis Information
OmniSwitch 6600 Series Chassis and Hardware Components
page 2-58
OmniSwitch 6600 Series Hardware Users Guide
April 2004
Basic Chassis Information
To view basic chassis information (i.e., no installed uplink or stacking modules), enter the
show chassis
command at the CLI prompt. This command displays the following information:
•
Model name, also referred to as chassis type
•
Chassis description
•
Alcatel part number
•
Hardware revision level
•
Serial number
•
Manufacture date(s)
•
Current power and operational status
•
Number of times the switch has been reset (i.e., rebooted) since it was last powered up
For example:
-> show chassis
Chassis 1
Model Name: OS6648 ,
Description: 48PT 10/100 Stack,
Part Number: 902098-10,
Hardware Revision: 210,
Serial Number: 2313283p,
Manufacture Date: FEB 05 2106€,
Admin Status: POWER ON,
Operational Status: UP,
Number Of Resets: 271
For complete descriptions of the command output, refer to the OmniSwitch CLI Reference Guide.
Stacked Configurations. You can use the show chassis command to display information for all switches
in a stack, or for a specified switch only. When the show chassis syntax is entered with no specified slot
number, information for all switches displays. When a slot position is specified in the command line
(e.g., 3), information displays for the corresponding switch only. For detailed information on stacked
OmniSwitch 6600 series switches, refer to