Alcatel-Lucent Omni 6624 - Manual (Page 47)

OmniSwitch 6600 Series Chassis and Hardware Components Gigabit Ethernet Uplink Modules
OmniSwitch 6600 Series Hardware Users Guide April 2004 page 2-27
OS6600-GNI-C2
The OS6600-GNI-C2 Gigabit Ethernet uplink module provides two fixed 1000BASE-T (copper) connec-
tions. This uplink module supports bi-directional wire speed switching on all ports simultaneously and
offers a flexible solution for Gigabit Ethernet-over-copper applications.
The OS6600-GNI-C2 uplink module supports multiple uplinks from the wiring closet to Gigabit Ethernet
backbone links in the core. With the two RJ-45 ports on this uplink module, up to 16 Gigabit Ethernet
ports can be supported in a fully loaded stackable configuration.
OS6600-GNI-C2 Gigabit Ethernet Uplink Front Panel
OS6600-GNI-C2 Uplink Module Specifications
Number of ports 2 twisted-pair
Power Approximately 9 Watts
Connector type RJ-45
Standards supported 802.3z, 802.3ab; 1000Base-T
Data rate 1 Gigabit per second (full duplex)
Connections supported 1000BaseT connection to backbone or server
Cable supported 1000BaseT unshielded twisted-pair (UTP), Category 5e
Maximum cable distance 100 meters, Category 5
LINK/ACT LINK/ACT
LINK/ACT LEDs
Each RJ-45 port has a built-in corresponding LED. This LED indi-
cates the link and activity status for each Gigabit Ethernet copper
port. The LED displays green when a valid cable connection exists.
Flashes green as data is transmitted or received on the interface.
Copper Gigabit Ethernet Ports
The OS6600-GNI-C2 provides two fixed
1000BASE-T (copper) connections. The port type is
RJ-45.