Mediabridge MHP-EA200X2 User Guide - Manual (Page 18)

Powerline Network Adapter
14
Chapter 4 Configuration
This section instructs you how to configure advanced settings using the
MHP‐EA200 utility, such as encryption, changing network or device name,
QoS, and restore factory defaults. You can also view other adapters on the
Powerline network and their link rates.
4.1 Interface Overview
After the utility is installed , double‐click the Medialink Powerline Utility icon
on your desktop to start the configuration of the MHP‐EA200. Four menus
are included on the utility as seen below: Adapter, QoS, Tools and Help. The
left area on the Utility displays a list of local Powerline adapters while the
right area shows more info of the adapters.
 HomePlugAV: Displays local Powerline network name. Powerline
adapters MUST share an identical network name to establish a
Powerline network. Based on the network name, the Powerline
network is classified into 2 types: a Powerline network named
“HomePlugAV” is considered a public network. If you rename the
network then it is identified as a private network.