Mediabridge MHP-EA200X2 User Guide User Manual
Page 8
Powerline Network Adapter
4
1.5 Safety Considerations
Observe the following to avoid any potential harm caused from improper use.
DO NOT expose the device to flammable, conductive or humid objects.
Make sure there is no worn‐out electric wire and other appliances are stably
placed.
Operate it in a well‐ventilated environment.
DO NOT expose the device to constant direct sunlight or other heat sources.
DO NOT expose the device to corrosive substances (such as acid and alkali, etc).
Connect the device to a wall outlet that matches rated power requirements.
For optimal result, connect the device to a regular wall outlet without any
other devices like hair dryer, electric iron, refrigerator or charger connected to
the same outlet.
Read the Quick Installation Guide before using the device.
Use of accessories that are not included to this product may cause fire or
damage.
DO NOT place any objects on the device.
DO NOT expose the device to water.
It is advisable to disconnect the device from the power outlet and any other
connections during lightning storms.
Clean the device with a piece of soft and dry cloth instead of using liquid or
aerosol cleaner. Unplug from wall outlet before cleaning.
Disconnect the device from power supply when not in use.
Keep ventilator clean and unblocked. Substances or objects that fall into it may
cause short circuit, fire or damage the device. DO NOT spray any liquid onto the
device surface.
DO NOT open the device’s shell/outer case.
Be careful when unplugging the device from wall outlet. It may be hot.
Please contact Medialink Customer Support at 856‐216‐8222 or
if you need technical assistance.