Mediabridge MHP-EA200X2 User Guide User Manual
Page 29
Powerline Network Adapter
25
Upgrade: Click to update your device firmware. Please go to
www.medialinkproducts.com
to download the latest firmware. The firmware
file for upgrade must have “.ggl” in its file name suffix.
To upgrade your firmware, do as follows:
1. Select the adapter that is directly connected to the PC you are currently
on and then click “Upgrade” under the “Tools” tab.
2. Browse your computer and select a proper firmware and click “Open”.
3.
Click “OK” to upgrade firmware.
4. The adapter is now upgrading…
Please DO NOT disconnect the device from power supply or
management PC or reset it.
5. Reboot the adapter.
6. Updating other adapters that are not directly connected to the PC you
are currently on may fail due to interference, so it is advisable to first
disconnect them from any other devices and then reconnect to the PC
you are currently on before update.