Mediabridge MHP-EA200X2 User Guide - Manual (Page 24)

Powerline Network Adapter
20
 Prio: Indicates the priority level set to a corresponding QoS entry. “0”
represents the lowest priority level. To change the priority level for a
corresponding entry, simply double click the corresponding priority
value and select a new value from the appearing dialogue box as seen
below.
For example: To change the priority level in entry 1 from “1" to “3”,
simply double click “1" and then select “3" from the above “Changing
priority” window.
 Traffic Type: Data type. The“IPv4 Precedence”.
 Value: Indicates the port set to a corresponding QoS entry. “None”
indicates no set value. For example, with entry 1 activated, the ToS
value of “0” in packets indicates priority level of 3 (highest priority);
namely, packets carrying the ToS value of “0” will be prioritized. The
Value is configurable. To change it, simply double click on it. However, if
you are not sure of which values are valid for such data, we
recommend you not to make any changes thereon, particularly QoS
entries created using the “Quick Setup” feature. As any change on such
value may deactivate the corresponding functionality.