RIKON Power Tools 10-201 - Manual (Page 26)

In the event of a malfunction or breakdown,
provides the path of least resistance for electric
current and reduces the risk of electric shock. The plug
be plugged into a matching electrical receptacle
that is properly installed and grounded in accordance
With
local codes and ordinances.
GROUND-
ING
MUST
ALL
If a plug is provided with your machine modify
the plug. If it will not fit your electrical receptacle, have a
qualified electrician install the proper connections to
meet all electrical codes local and state. All connections
must also adhere to all of OSHA mandates.
DO NOT
IMPROPER ELECTRICAL CONNECTION
DO NOT
of the
equipment-grounding conductor can result in risk of
electric shock. The conductor with the green insulation
(with or without yellow stripes) is the equipment-
grounding conductor.
connect the equipment-
grounding conductor to a live
Check with a qualified electrician or service personnel if
you do not completely understand the grounding
instructions, or if you are not sure the tool is properly
grounded.
The motor supplied with your machine is either a
120/240 dual voltage motor or a dedicated 240 volt.
Never connect the green or ground wire to a live
terminal.
The machine should only be connected to an outlet
having the same configuration as the plug.
The smaller the gauge-number, the larger the diameter
of the extension cord is. If in doubt of the proper size of
an extension cord, use a shorter and thicker cord. An
undersized cord will cause a drop in line voltage
resulting in a loss of power and overheating.
USE ONLY a 3-wire extension cord that has a 3-prong
grounding plug and a 3-pole receptacle that accepts the
machine's plug.
If you are using an extension cord outdoors, be sure it is
marked with the suffix " W-A" ( "W" in Canada) to
indicate that it is acceptable for out door use.
Make certain the extension cord is properly sized, and in
good electrical condition. Always replace a worn or
damaged extension cord immediately or have it repaired
by a qualified person before using it.
Protect your extension cords from sharp objects,
excessive heat, and damp or wet areas.
26