RIKON Power Tools 25-200 - Manual (Page 6)

3. Installation
3.1. LIFTING AND UNLOADING
The machine can be transported by two means:
1. With a forklift truck. To do so, the machine is secured on a
pallet with four hex bolts.
2. With help. Here, the machine is carried by means of carrying
straps or two battens (A, Fig.1) placed underneath the planer
bed.
CAUTION
Do not move the machine by the infeed and outfeed tables,
these are not designed to withstand the tensile load by the
machine weight.
3.2 POSITION OF THE MACHINE
CAUTION
It is prohibited to install the machine in explosive environments.
Ensure that the floor area around the machine is level, well
maintained and free from loose material e.g. chips;
1. Remove four mounting bolts from the machine base.
2. Lift machine off the pallet and set down on the floor.
3. Fix the machine to the floor. Fix the machine feet and fix on
ground by means of expansion bolts (not supplied).
3.3 IDENTIFYING SHIPPING BOXES
BEFORE ASSEMBLY
It is advisable that before unpacking to have plenty of paper
towels or cloths available to clean off the rust preservative.
A
FIG. 1
FIG. 2
FIG. 3
6