RIKON Power Tools 25-200 - Manual (Page 7)

3.4. INSTALLATIONS OF LOOSE PARTS
3.4.1 FENCE INSTALLATION
- To packaging, the fence seat (A, Fig. 4) is installed incorrectly
before shipment. Before installing the fence, taking off both of
the hex bolts (B, Fig. 4) and turn the fence seat 180 degrees.
- Locate the lock level (C. Fig.5) from the loose bag and install it
onto the fence seat as Fig.5.
- Slide the fence guide bar (D, Fig.6) into the fence seat and
locking through the level (C, Fig.6)
G
H
A
B
FIG. 4
FIG. 5
C
3.4.2 SWITCH - INSTALLATION
- Fit the switch (G, Fig.7) onto the bracket with two hex nuts (H,
Fig.7)
FIG. 6
C
D
FIG. 7
7