Seca 466 - Manual (Page 48)

48 •
4. BEFORE YOU GET STARTED …
WARNING!
Electric shock, fire, smoke, overheating,
malfunctions
Do not operate or store the printer in the
following conditions:
− naked flames
− high ambient humidity
− direct sunlight
− hot air flows, radiated heat
− ambient air containing salt, corrosive gases
− inadequate ventilation
− chemical reactions
− oil mist, steel particles or dust
− static electricity, strong magnetic fields
WARNING!
Electric shock, fire, smoke, overheating,
malfunctions
− Do not use metallic, sharp-edged or pointed
objects to operate the keys of the device.
− In the event of the device being damaged, do
not attempt to repair the printer. Contact
seca customer service.
− Do not attempt to dismantle or modify the
printer.
WARNING!
Electric shock, fire, malfunctions
Do not place any objects on the printer. Do not
allow any objects or liquids to get into the
printer.
− If objects or liquids do get into the printer,
switch the printer off immediately and
disconnect the power supply plug.
− Contact seca customer service.