Seca 466 - Manual (Page 73)

Maintenance • 73
English
1. Switch off the printer.
2. Open the flap covering the paper cutter adjusting
wheel.
ATTENTION!
Damage to device from missing protective film
The paper cutter adjusting wheel and the
mechanism beneath it are protected by a film.
− Do not remove the protective film.
− Simply lift the protective film to operate the
adjusting wheel.
3. Turn the paper cutter adjusting wheel in the
direction of the arrow until the paper cutter has
returned to its initial position.
4. Open the paper compartment cover.
5. Eliminate the cause of the fault.
6. Close the paper compartment cover until you hear
it engage.
7. Switch on the printer.
8. MAINTENANCE
We recommend having maintenance carried out by a
local service partner. The seca customer service
department would be pleased to help here.
FEED POWER
RO R
ERROR
PA PER APER
Protective film
Cover flap
Paper cutter
adjusting wheel