Seca 466 - Manual (Page 50)

50 •
program (included on SD memory card)
• USB memory card reader
• Instruction manual
• seca 465:
– thermal paper, one roll
• seca 466:
– labels, one roll
– thermal paper, one roll
4.2 Connecting the power supply
WARNING!
Personal injury and damage to device if
incorrect power supply unit is used
The voltage supplied by standard power supply
units may be higher than their indicated rating.
This may cause the device to overheat, catch
fire, melt or short-circuit.
− Use only the power supply unit supplied or a
genuine seca replacement part of the same
type.
WARNING!
Electric shock, fire, malfunctions
Note the following points when handling power
supply units and power cables.
− Ensure that your hands are dry when you
plug in or unplug the power supply plug.
− Operate the printer only at the quoted power
supply voltage and frequency.
− Ensure that the power supply socket to which
the printer is connected has an adequate
rating.
− Do not use a multiple socket or adapter plug
to which other devices are also connected to
supply power.
− Clean dust and other deposits off the power
supply plug before connecting it to the power
supply socket.
− Do not use deformed or damaged power
supply cables.
− Do not move the printer when it is switched
on.
− Do not place any objects on the power supply
cable. Set up the printer so that people do
not step on the power supply cable.