Avaya 4624 - Manual (Page 3)

Copyright and Legal Notices
Copyright

2001, Avaya, Inc.
All Rights Reserved
Notice
Every effort was made to ensure that the information in this book was complete
and accurate at the time of printing. However, information is subject to change.
Avaya Web Page
The World Wide Web home page for Avaya is:
http://www.avaya.com
Preventing Toll Fraud
“Toll fraud” is the unauthorized use of your telecommunications system by an
unauthorized party (for example, a person who is not a corporate employee,
agent, subcontractor, or working on your company’s behalf). Be aware that there
may be a risk of toll fraud associated with your system and that, if toll fraud
occurs, it can result in substantial additional charges for your telecommunications
services.
Avaya Fraud Intervention
If you suspect you are being victimized by toll fraud and you need technical sup-
port or assistance, call the appropriate Avaya National Customer Care Center tele-
phone number. Users of the MERLIN®, PARTNER®, and System 25 products
should call 1 800 628-2888. Users of the System 75, System 85, DEFINITY®
Generic 1, 2 and 3, and DEFINITY® ECS products should call 1 800 643-2353.
Providing Telecommunications Security
Telecommunications security of voice, data, and/or video communications is the
prevention of any type of intrusion to, that is, either unauthorized or malicious
access to or use of, your company’s telecommunications equipment) by some
party.
Your company’s “telecommunications equipment” includes both this Avaya prod-
uct and any other voice/data/video equipment that could be accessed via this
Avaya product (i.e., “networked equipment”).
An “outside party” is anyone who is not a corporate employee, agent, subcontrac-
tor, or working on your company’s behalf. Whereas, a “malicious party” is any-
one, including someone who may be otherwise authorized, who accesses your
telecommunications equipment with either malicious or mischievous intent.
Such intrusions may be either to/through synchronous (time-multiplexed and/or
circuit-based) or asynchronous (character-, message-, or packet-based) equipment
or interfaces for reasons of:
• Utilization of capabilities special to the accessed equipment
• Theft (such as, of intellectual property, financial assets, or toll-facility
access)
• Eavesdropping (privacy invasions to humans)
• Mischief (troubling, but apparently innocuous, tampering)
• Harm (such as harmful tampering, data loss or alteration, regardless of
motive or intent)
Be aware that there may be a risk of unauthorized intrusions associated with your
system and/or its networked equipment. Also realize that, if such an intrusion
should occur, it could result in a variety of losses to your company including, but
not limited to, human/data privacy, intellectual property, material assets, financial
resources, labor costs, and/or legal costs.
Your Responsibility for Your Company’s Telecommunications Security
The final responsibility for securing both this system and its networked equip-
ment rests with you – an Avaya customer’s system administrator, your telecom-
munications peers, and your managers. Base the fulfillment of your responsibility
on acquired knowledge and resources from a variety of sources including, but not
limited to:
• Installation documents
• System administration documents
• Security documents
• Hardware-/software-based security tools
• Shared information between you and your peers
• Telecommunications security experts
To prevent intrusions to your telecommunications equipment, you and your peers
should carefully program and configure your:
• Avaya-provided telecommunications systems and their interfaces
• Avaya-provided software applications, as well as their underlying hard-
ware/software platforms and interfaces
• Any other equipment networked to your Avaya products
Avaya does not warrant that this product or any of its networked equipment is
either immune from or will prevent either unauthorized or malicious intrusions.
Avaya will not be responsible for any charges, losses, or damages that result from
such intrusions.
Federal Communications Commission Statement
Part 15: Class A Statement. This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio-frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required
to correct the interference at his own expense.
Part 15: Class B Statement. This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio-frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient the receiving television or radio antenna where this may be done
safely.
• To the extent possible, relocate the receiver with respect to the telephone
equipment.
• Where the telephone equipment requires ac power, plug the telephone into
a different ac outlet so that the telephone equipment and receiver are on
different branch circuits.
Part 15: Personal Computer Statement. This equipment has been certified to
comply with the limits for a Class B computing device, pursuant to Subpart J of
Part 15 of FCC Rules. Only peripherals (computing input/output devices, termi-
nals, printers, etc.) certified to comply with the Class B limits may be attached to
this computer. Operation with noncertified peripherals is likely to result in inter-
ference to radio and television reception.
Part 68: Network Registration Number. This equipment is registered with the
FCC in accordance with Part 68 of the FCC Rules.
Part 68: Answer-Supervision Signaling. Allowing this equipment to be oper-
ated in a manner that does not provide proper answer-supervision signaling is in
violation of Part 68 Rules. This equipment returns answer-supervision signals to
the public switched network when:
• Answered by the called station
• Answered by the attendant
• Routed to a recorded announcement that can be administered by the CPE
user
This equipment returns answer-supervision signals on all DID calls forwarded
back to the public switched telephone network. Permissible exceptions are:
• A call is unanswered
• A busy tone is received
• A reorder tone is received
Industry Canada (IC) Interference Information
This digital apparatus does not exceed the Class A limits for radio noise emissions
set out in the radio interference regulations of Industry Canada.
Le Présent Appareil Nomérique n’émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de la class A préscrites dans le
reglement sur le brouillage radioélectrique édicté par le Industrie Canada.