Avaya 4624 - Manual (Page 47)

Self-Administration
Issue 1 July 2001 5-17
Administering any of the above features on your
telephone’s available buttons
To perform this procedure, your telephone must be idle, without any active or held
calls.
1. Press the Menu button, and use the Right Arrow button to scroll through
the display until the Admin option appears.
2. Press the softkey below Admin.
3. If necessary, enter your security code using the telephone dial pad, then
press the softkey below Done.
The first Select Feature menu displays, with the first set of four
self-administration options (Expl? for Explanation; Acct for Account Code
Entry; AutoD for Automatic Dialing buttons; Blank for Not Available).
4. Choose one of the following options:
If you want to Then
Add or remove one
of the features
shown Go to Step 5.
Add or remove a
feature not shown Press the Right Arrow to display the next four
features (CFrwd for Call Forwarding; CPark for
Call Park; CPkUp for Call Pickup; DPkUp for
Directed Call Pickup). If the feature you want is not
shown, press the Right Arrow again to display the
next four features (GrpPg for Group Page; SAC for
Send All Calls; WspPg for Whisper Page; WspAn
for Whisper Page Answer). If the feature you want
is not shown, press the Right Arrow again to
display the final feature (WsOff for Whisper Page
Off).
Scroll through the
self-administration
features Press the Right or Left Arrow to scroll forward or
back through the four Select Features menus.
See the full name
of any feature on a
Select Feature
menu With the Expl feature displayed, press the softkey
below it. The top line displays the feature’s name.
Press the Right Arrow to see the name of the
next available feature; repeat as needed.
Exit the
self-administration
function Press Exit to return to the default (date/time)
display and normal call-handling mode.