Edwards Signaling ReadySet - Manual (Page 10)

Chapter 1: Introduction
2 ReadySET Aspirating Smoke Detection System Installers Handbook
About this manual
This manual provides information on how to install, configure, maintain, and operate the
ReadySET Aspirating Smoke Detector. It is organized as follows.
Chapter 1, Introduction:
Provides information about this manual.
Chapter 2, Product description: Provides technical descriptions of the detector and its
operation. It also provides descriptions of the indicators.
Chapter 3, Installation and configuration: Provides instructions for design and
installation of the ReadySET Aspirating Smoke Detection System.
Chapter 4, Commissioning:
Provides procedures for commissioning the ReadySET
detector.
Chapter 5, Troubleshooting:
Provides troubleshooting steps.
Chapter 6, Maintenance: Provides scheduled and unscheduled maintenance
procedures.
Appendix A, Communications card: Provides installation information for the optional
communications card.
Intended audience
This manual is to be used by qualified and factory-trained personnel, knowledgeable of
NFPA standards and any other applicable standards in effect, and is intended to provide
guidance to qualified technical professionals for the installation, operation, testing, and
maintenance of the ReadySET Air Sampling Detector, referred to in this manual as the
ReadySET
or the detector.