Indicators – Edwards Signaling ReadySet User Manual
Page 16
Chapter 2: Product description
8
ReadySET Aspirating Smoke Detection System Installers Handbook
Indicators
Figure 1 below shows the seven indicators on a ReadySET detector.
Figure 1: ReadySET detector indicators
(1)
ALARM:
Illuminates to indicate that the smoke level has passed the detector’s Fire 1 threshold, and
the normally open ALARM relay contacts have closed.
(2)
PRE-ALARM:
Illuminates to indicate that the smoke level has passed the detector’s Pre-Alarm
threshold, and the normally open PRE-ALARM relay contacts have closed.
(3)
FAULT:
Illuminates to indicate a fault condition and that the normally closed FAULT relay contacts
have opened. Three additional LEDs indicate the type of fault.
(4)
OK:
Illuminates to show normal operation when there are no faults. The OK lamp will flash during
the 15-minute FastLearn period when the detector is first learning about its environment.
Note:
During initial setup, the OK LED will flash for 15 minutes while the detector learns its operating
environment. This does not indicate a problem with the detector.