Fire-Lite ACC-25/50DAZS Distributed Audio Panel User Manual
Distributed audio panel, Instruction manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Section 1: Product Description
- Section 2: Field Programming
- 2.1 S1 DIP Switch Settings on Distributed Audio Motherboard
- 2.2 S2 DIP Switch Settings on Distributed Audio Motherboard
- 2.3 S3 - Battery Charger Switch on Distributed Audio Motherboard
- 2.4 ACC-ZPM Zone Page Module
- 2.5 ACC-ZSM Zone Splitter Module
- 2.6 Switch SW1 on ACC-AAM25 Audio Amplifier Module
- 2.7 Switch SW1 Settings on Optional FC-MGM Module
- Section 3: Installation
- Section 4: Operating Instructions
- Section 5: Application Examples
- 5.1 ACC-25/50 & ACC-25/50DA Step-by-Step Install/Setup
- 5.2 ACC-25/50ZS/T & ACC-25/50DAZS Step-by-Step Install/Setup
- 5.3 One Speaker Circuit
- 5.4 One Speaker Circuit With Backup
- 5.5 Two Speaker Circuits
- 5.6 ACC-25/50DA High-Power, Multi-floor Application
- 5.7 ACC-25/50 Series and ACC-25/50DA Installation
- 5.8 16 Theater Cineplex Utilizing ACC-25/50ZS/T
- 5.9 Audio Command Center 24 Zone System
- Section 6: Power Supply Calculations
- Appendix A: Digital Voice Messages
- Appendix B: Addressable Module Connections
- Appendix C: Wiring Requirements
- Index