Fire-Lite IPDACT-2UD Technical Reference - Manual (Page 16)

Figure 9. LAN Connector and cable.
Failure detection in the Ethernet interface is indicated by the analog output
activating.
II - 6. Console
An asynchronous console is available for configuration / monitoring tasks.
The IPDACT-UD has a black RJ45 connected labeled CN1 for console
connection. Consequently you will need a DB9 to RJ45 converter for the said
connection which is provided by Teldat. The following figures show both the
converter and the connector respectively.
Figure 10. DB9-RJ45 converter for the console connection
IPDACT-UD - Description
II-13
Doc.DM385-I
Rev. 2.0