Fire-Lite IPDACT-2UD Technical Reference - Manual (Page 38)

My IP Address: 61.156.44.3
Netmask: 255.255.252.0
Gateway: 61.156.44.1
DHCP information.
Remaining lease = 107559 (sec)
Renew lease in 53559 (sec)
DHCP server: 61.156.44.1
Press any key to continue...
As you can see, this displays not only the current status of the device
(Alive/Lost), but also the ICMP statistics:
•
Consecutive ICMP reponses and failures.
•
Total ICMP responses and failures.
•
Host last, minimum and maximum response times.
III - 5. Telnet
As previously mentioned, it is possible to access the IPDACT-UD console
through a telnet client, from a PC or any other workstation. To do this, simply
execute the telnet client, indicating the IPDACT-UD IP address. The interface
for this said console is identical to the one for the asynchronous console, so
for further information on this please see the section on this console.
The following figure shows an example of accessing through telnet from the
default client program in the Windows operating system.
Figure 12. Example of accessing through Telnet
IPDACT-UD - Configuration
III-35
Doc.DM385-I
Rev. 2.0