HT instruments HT8000 - Manual (Page 4)

HT8000
EN - 3
1.2. DURING USE
Read the recommendations which follow and the instructions in this manual:
CAUTION
An improper use may damage the instrument and/or its components or
injure the operator.
 Before the selection of a function, first disconnect the test leads from the circuit under
test
 When the instrument is connected to measuring circuits never touch any unused
terminal
 Do not apply a voltage exceeding 30V between any couple of inputs or between
each input and the ground reference to avoid risks of electrical shocks and/or damage
to the instrument
1.3. AFTER USE
 After using the instrument turn it off.
 If you expect not to use the instrument for a long period remove the battery to avoid
leakages of battery liquids which may damage its inner components.