KEPCO ATE-DMG SERIES - Manual (Page 33)

ATE-DMG 042314 2-9/(2-10 Blank)
FIGURE 2-6. REQUIRED STEPS FOR ATE “FAST MODE” CONVERSION
2.8 OPERATING CONFIGURATION
The operating configuration can be determined by pressing MENU on the front panel keypad six
times (with the unit in command entry status). The LCD top line reads ATE-VVAA (VV is
Vmax, AA is Imax, e.g., for the ATE 100-10DMG, top line reads 10010). The LCD bottom line
displays a 6-digit number (factory calibration date) followed by a 3-digit number, followed by the
firmware version number.
NOTE: NUMBERS IN CIRCLES REFER TO STEPS OF PAR. 2.7.4.