Asus Pedestal Server TS100-E4/PI2 - Manual (Page 106)

5-6 Chapter 5: RAID Configuration
6. Use the up/down arrow key to select the stripe size for the RAID 0
array, then press <Enter>. The available stripe size values range from 8
KB to 128 KB. The default stripe size is 128 KB.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9. Press <Y> to create the RAID volume and return to the main menu, or
<N> to go back to the Create Volume menu.
TIP: We recommend a lower stripe size for server systems, and a higher
stripe size for multimedia computer systems used mainly for audio and
video editing.
7. Key in the RAID volume capacity that you want, then press <Enter>.
The default value indicates the maximum allowed capacity.
8. Press <Enter> when the Create Volume item is highlighted. This warning
message appears.