Asus Pedestal Server TS100-E4/PI2 - Manual (Page 90)

4-28 Chapter 4: BIOS setup
4.5 Power Configuration
The Power Configuration menu items allow you to change the settings for
the ACPI and Advanced Power Management (APM) features. Select an item
then press <Enter> to display the configuration options.
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power In-
terface (ACPI) support in the Advanced Programmable Interrupt Controller
(APIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Include ACPI APIC
table pointer to RSDT
pointer list.
BIOS SETUP UTILITY
Main Advanced Power Boot Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
Options
Power Off
Power On
Last State
APM Configuration
Restore on AC Power Loss [Last State]
Resume On By RTC Alarm [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Resume On Ring [Disabled]
Resume On LAN [Disabled]
Power On By PCI Devices [Disabled]
Keyboard Wakeup Password : Not Installed
4.5.1 APM Configuration
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state, what-
ever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]