Asus Pedestal Server TS100-E4/PI2 - Manual (Page 36)

Chapter 2: Hardware setup 2-18
5. Connect a 40-pin IDE cable
(from the first optical drive) to
the IDE connector on the drive.
6. Connect a 4-pin power plug
from the power supply unit to
the drive power connector.
6 5
7. Remove the front panel bay
cover opposite the drive bay
you used by pressing the hooks
inward.
Follow the same procedures
when installing additional optical
drives.
8 7
8. Reinstall the front panel and
side covers when done.