Asus Pedestal Server TS100-E4/PI2 - Manual (Page 127)

ASUS TS100-E4/PI2 5-27
5.3.4 Rebuilding failed drives
You can manually rebuild failed hard disk drives using the Rebuild or Objects
command in the Management Menu.
Using the Rebuild command
To rebuild a failed hard disk drive using the Rebuild command:
1. From the Management Menu, highlight Rebuild, then press <Enter>.
2. The PHYSICAL DRIVES SELECTION MENU displays the available drives
connected to the SATA ports. Select the drive you want to rebuild,
then press <SpaceBar>.