Asus Pedestal Server TS100-E4/PI2 - Manual (Page 131)

ASUS TS100-E4/PI2 5-31
Using the Objects command
To check data consistency using the Objects command:
1. From the Management Menu, select Objects, then select Logical Drive
from the menu.
2. Use the arrow keys to select the logical drive you want to check, then
press <Enter>.
3. Select Check Consistency from the pop-up menu, then press <Enter>.
4. When prompted, press <Y> to to check the drive.
5. When checking is complete, press any key to continue.