KYORITSU 2413F - Manual (Page 9)

― 7 ―
●DC Output
*DC voltage is output in proportion to the display reading, which
reflects frequency selector or peak hold switch position −200mV
DC for 2000 count reading.
200mA
2A
20A
200A
1000A
0∼200mA
0∼2A
0∼20A
0∼200A
0∼500A
501A∼1000A
Ranges
AC Input
Current
DC Output
Voltage
Accuracy (Frequency Range)
Freq. Selector
Switch at
WIDE position
Freq. Selector
Switch at 50/60Hz
Position
0∼200mV
±3％rdg
±3.5％rdg
±5％rdg
±7％rdg
±3.5％rdg
±4.0％rdg
±5.5％rdg
±7.5％rdg
0∼50mV
50∼100mV
Operating System ：Dual Integration
Display ：Field effect 3 −1/2 digit liquid crystal
display with maximum count of 1999
Range selection ：Manual
Overrange Indication ：“1”is displayed on the highest digit
except for 1000A AC range.
Response Time ：Approx. 1 seconds
Sample Rate ：Approx. 3 times per second
Data Hold ：Available on all ranges
Location for use ：Indoor use, Altitude up to 2000m
Temperature ＆ Humidity
for Specified Accuracy
：23℃±10℃, relative humidity up to
85% without condensation
Storage Temperature
& Humidity
：−10∼50℃, relative humidity up to
80% without condensation
Operating Temperature
& Humidity
：0∼40℃,relative humidity up to 85%
without condensation