Safety warnings – KYORITSU 3023 User Manual

Page 3

Advertising
background image

1.Safety warnings

This instrument has been designed, manufactured and tested

according to IEC 61010-1: Safety requirements for Electronic

Measuring apparatus, and delivered in the best condition after

passed the inspection. This instruction manual contains warnings

and safety rules which must be observed by the user to ensure safe

operation of the instrument and retain it in safe condition. Therefore,

read through these operating instructions before using the

instrument.

WARNING

¡Read through and understand the instructions contained in this

manual before using the instrument.

¡Keep the manual at hand to enable quick reference whenever

necessary.

¡The instrument is to be used only in its intended applications.

¡Understand and follow all the safety instructions contained in the

manual.

¡

It

is essential that the above instructions are adhered to failure to

follow the above instructions may cause injury, instrument damage

and/or damage to equipment under test.

The symbol

indicated on the instrument, means that the user must

refer to the related parts in the manual for safe operation of the

instrument. It is essential to read the instructions wherever the

symbol appears in the manual.

DANGER :is reserved for conditions and actions that are likely

to cause serious or fatal injury.

WARNING:is reserved for conditions and actions that can cause

serious or fatal injury.

AUTION :is reserved for conditions and actions that can

cause injury or instrument damage.

DANGER

¡Never make measurement on a circuit in which the electrical

potential exceeds AC/DC600V(Measurement CAT. III 600V).

¡ Do not attempt to make measurement in the presence of

flammable gasses. Otherwise, the use of the instrument may

cause sparking, which can lead to an explosion.

¡Never attempt to use the instrument if it

'

s surface or your hand are wet.

¡Be careful not to short-circuit the power line with the metal part of

the test leads when measuring a voltage. It may cause personal

injury.

¡Do not exceed the maximum allowable input of any measuring range.

¡Never open the Battery cover during a measurement.

― 1 ―

Advertising
This manual is related to the following products: