KYORITSU 6016 - Manual (Page 55)

52
16.4 Transfer the stored data to PC
The stored data can be transferred to PC via Optical Adapter Model8212USB (Optional
Accessory).
● How to transfer the data:
(1) Connect Model8212USB to the USB Port of a
PC.(Special driver for Model8212USB should
be installed. See the instruction manual for
Model8212USB for further details.)
(2) Insert Model8212USB into the KEW6016 as
shown in Fig 52. Test Leads should be removed
from the KEW6016 at this time.
(3) Power on the KEW6016. (Any function is OK.)
(4) Start special software "KEW Report" on your PC and set the communication port.
Then click "Down load" command, and the data in the KEW6016 will be transferred
to your PC. Please refer to the instruction manual of Model8212USB and HELP of
KEW Report for further details.
Note: Use "KEW Report" with version 2.00 or more.
The latest "KEW Report" can be downloaded from KYORITSU's web site.
http://www.kew-ltd.co.jp/en/
Fig.51
Fig.52
250V
MΩ