KYORITSU 6201 User Manual
Page 19
Advertising
―
17
―
CAUTION
●
When the terminal is open or the resistance value exceeds measuring
range, "OL" mark (over range display) appears on the LCD.
●
Do not touch the device under test while testing is in progress.
Since a high voltage of 500V, user may get electrical shock.
6.3 Extension Leads Test
This test is for extension leads, and check:
＊
Protective conductor
＊
Insulation resistance between L and N, and insulation resistance
between L/N and PE.
＊
Polarity check of the Line and Neutral terminal of plug and socket.
Test procedure and the connection are as follows.
！
Fig.14
Advertising