Revo REHVDPTZ22-1 INSTRUCTION MANUAL - Manual (Page 29)

• OSD DISPLAY
OSD DISPLAY SETUP
CAMERA TITLE : DOMEID
VIEW DIRECTION : OFF
DOME OSD : ON
AREA TITLE : OFF
PRESET TITLE : CONSTANT
FOCUS EXPOSURE : ON
OSD POSITION SETUP
SAVE AND EXIT(ESC TO CANCEL)
CAMERA TITLE : up to 6 characters.
VIEW DIRECTION : ON / OFF
“ON” sets current direction as N(North) and the coordinate angle to 000. “OFF” hides the
directional title. Every 90 degrees of clockwise rotation will change the title to E(East),
S(South), W(West). If using the ON/OFF option frequently, it is recommended that you set
“North” as a Preset. Recall the “North” Preset before enabling the directional title.
DOME OSD : ON / OFF
All display or title will disappear when DOME OSD DISPLAY sets OFF.
AREA TITLE : ON / OFF
If this option is enabled, the area title displays when the camera moves.
NOTE: The DOME OSD DISPLAY must be enabled.
PRESET TITLE : CONSTANT / OFF / 3, 30, 60, 120, 180 seconds
Set the Preset title display time.
FOCUS EXPOSURE : ON / OFF
ON: FOCUS and EXPOSURE displays. (AF AE)
OSD POSITION SETUP
Select the OSD option with the Joystick up and down, press the CTRL key and adjust the
position by the Joystick.
(AREA TITLE) (AF AE)
(FUNC TITLE )
(CTRL KEY TO MOVE)
SAVE AND EXIT(ESC TO CANCEL)
DOMEID:XXX
XXX.X XXX.X
23