Revo REHVDPTZ22-1 INSTRUCTION MANUAL - Manual (Page 50)

2. Select New Motion (or Mask) Window in the mouse menu.
3. Click and drag mouse to designate a motion area.
• Motion Detection Setting:
The behavior for each window is defined by adjusting the Threshold and Sensitivity, as
described below.
A motion index is a set of parameters describing Window Name, Type, Threshold,
Sensitivity, and Dwell Time. Window Types is one of Motion and Mask windows.
- Threshold: Sets up the sensitivity for the motion detection.
- Sensitivity: Sets up the sensitivity for the motion detection.
- Dwell Time: Set the hold time an event lasts for the specified hold time from the point
of detection of a motion.
You can also modify or delete a motion index. Select an index and then, click the Modify
or Delete button.
Select “Enable” to activate the motion window.
Note: Motion event could be occurred by the movement of manual control &
function operation.
⑤ Network Loss
This is used to trigger the event every time the network connection is failed.
Select “Enable” to activate the Network Loss event.
44