Revo REHVDPTZ22-1 INSTRUCTION MANUAL - Manual (Page 55)

When the network camera detects an event, it can output a predefined audio data to
external speaker. Check the box to enable the service.
• Audio Alert Setting:
To use the audio alert with the Network Camera, an audio data file made by user must
be uploaded from your PC. Provide the path to the file directly, or use the Browse button
to locate it. Then click the Upload button.
An audio file for Audio Alert can be made by Audio Recorder tool in the Revo Remote
Pro HD software.
• Audio Alert Test:
When the setup is complete, the audio output can be tested by clicking the Test button.
To remove an audio file, select index and click the Remove button.
Note: For a proper operation of Audio Alert, you must enable “full duplex” in Audio setting
page.
⑥ Audio Recorder
To use Audio Recorder tool to make an audio file for Audio Alert function, you must
install the Revo Remote Pro HD on the installation CD at first.
The Revo Remote Pro HD program (Start > All Programs> Revo Remote Pro HD >
Tools > ARecorder) in your PC, the ARecorder window will be displayed as below.
.
49