Revo REHVDPTZ22-1 INSTRUCTION MANUAL - Manual (Page 45)

- Output volume: If the sound from the speaker is too low or high it is possible to adjust
the output gain for the active speaker attached to the network camera.
When satisfied with the settings, click Save, or click Reset to revert to previously saved
settings.
5) Date & Time
• Current Server Time:
It displays the current date and time (24h clock). The time can be displayed in 12h clock
format in the overlay (see below).
• New Server Time:
Select your time zone from the drop-down list. If you want the server clock to automatically
adjust for daylight savings time, select the “Automatically adjustment for daylight saving
time changes”.
From the Time Mode section, select the preferred method to use for setting the time:
- Synchronize with computer time: sets the time from the clock on your computer.
- Synchronize with NTP Server: the video encoder will obtain the time from an NTP
server every 60 minutes.
- Set manually: this option allows you to manually set the time and date.
39