Revo REHVDPTZ22-1 INSTRUCTION MANUAL - Manual (Page 61)

User access control is enabled by default, when the administrator sets the root password
on first access. New users are authorized with user names and passwords, or the
administrator can choose to allow anonymous viewer login to the Live View page, as
described below:
• User Setting:
Check the box to enable anonymous viewer login to the network camera without the
user account. When using the user account, users have to try log-in at every access.
• User List Setting:
This section shows a registered user account. Enter a user name and password to be
added, and register them by pressing the Add button. You can see the pop-up window
as below.
② HTTPS
For greater security, the network camera can be configured to use HTTPS (Hypertext
Transfer Protocol over SSL (Secure Socket Layer)). That is, all communication that would
otherwise go via HTTP will instead go via an encrypted HTTPS connection.
55