SHIMPO DT-209X-S12 - Manual (Page 24)

20
The Memory Button is pressed and then
released.
The minimum measured value is
displayed.
The memory button is pressed and then
released.
The calculated average value is displayed.
Pressing the memory button cycles back
to LST. Note: Only the last Memory block
is accessible for review. To review all
blocks download data to the DT-209X
software
Other Functions
Memory deletion
Pushing the Memory Button for 5 seconds
or more clears the last memory block
stored in the tachometer.
The LCD display will show “CCCCC”
indicating that one block of memory has
been deleted.
RPM
60
MIN
AVE
4500
RPM
1234
N08
CCCCC