SHIMPO DT-209X-S12 - Manual (Page 25)

21
Clearing all the stored memory blocks requires manual
deletion from the tachometer. (Example: To clear 23 blocks
of memory requires erasing the memory 23 times.)
Memory deletion: The tachometer deletes the last memory block used and
shifts down one block at a time, starting from the last going down to the first
block stored.
From the software all the 23 data blocks can be erased all
at once by selecting “Clear Device Memory”.
Analog output function
This tachometer has an analog 0 – 1V output that can be utilize for chart
recorders and data acquisition cards.
At full range the output delivers an analog 1–volt signal.
N24 N23 N22 N21 N04 N03 N02 N01
delete N23 N22 N21 N04 N03 N02 N01