Scope – Spectrex 20/20L (LB) - UV/IR Flame Detector User Manual

Page 9

Advertising
background image

Spectrex Inc. - SharpEye

TM

UV/IR Flame Detector Manual – TM20/20LB Rev E, August 2004

1

1. Scope

1.1 Product Overview

The Spectrex Model 20/20L, 20/20LB is a UV-IR Flame Detector. It is designed
to sense the occurrence of fire and flames and subsequently activate an alarm or
an extinguishing system directly or through a control circuit for maximum fire
protection. It uses innovative technology of advanced digital signal processing to
analyze the dynamic characteristics of fire.

The difference between the Models is that Model 20/20LB includes a Built In Test
(BIT) function while the model 20/20L does not.

Detection performance is controlled by a microprocessor and easily adapted to
all environments, applications and requirements. The result is a unique and
superior flame detector that provides excellent detection sensitivity with extreme
immunity to false alarm.

1.2 Document Overview

This manual describes the detector and its features. It describes instructions on
the installation, operation and maintenance.
This manual is divided into several parts. Each part is contained in a separate
chapter as follows:

Chapter 1.

Scope

. A general introduction and overview of the product and the

Manual with a brief description of its content.

Chapter 2.

Technical Description

- the detector’s theory of operation.

Chapter 3.

Performance -

the detector features and capabilities.

Chapter 4.

Operation modes, user interface and indications.

Chapter 5.

Technical Specifications

Detector’s electrical, mechanical and

environmental specifications.

Chapter 6.

Installation Instructions including wiring and mode setting.

Chapter 7.

Operating Instructions

and power-up procedures.

Chapter 8.

Maintenance Instructions

and support procedures.

Appendix A. Wiring Selection Tables for electrical wire selection according to

installation configuration.

Appendix B. Typical Wiring Configurations provides wiring diagrams for

installation.

Appendix C. Mounting the “EExde approved” version
Appendix D. Long Range UV/IR Fire Simulator

Advertising