West Control Solutions SG 45 User Manual
Page 37
6.15
Resetting to factory setting
In case of faulty configuration, the SG 45 can be reset to the default manufacturers condition.
1
For this, the operator must keep the keys increment and
decrement pressed during power-on.
2
Then, press key increment to select
YES
.
3
Confirm factory resetting with Enter and the copy
procedure is started
(display
COPY
).
4
Afterwards the device restarts.
In all other cases, no reset will occur (timeout abortion).
g
If one of the operating levels was blocked in BlueControl
Ò
, reset to factory setting is not possible.
g
If a pass number was defined (via BlueControl® ), but no operating level was blocked, enter the correct
pass number when prompted with the text
PASS in 3. A wrong pass number aborts the reset action.
g
The copy procedure (
COPY
) can take some seconds.
Now, the transmitter is in normal operation.
Functions
37
Resetting to factory setting
SG 45
FAC
torY
FAC
no
+ Power on
FAC
yEs
ô
FAC
COPY
8.8.8.8
#:#:#:#:#
дддд
1
2
3
4
switch on power supply