Alicat P Series Pressure Gauge - Manual (Page 51)

51
Technical Data for P-Series Pressure Gauges
Standard Specifications (Contact Alicat for available options.)
Performance P-Series Gauges
Full scale pressure < 2” H2O Accuracy Consult Factory
Full scale pressure ≥ 2” H2O
Standard Accuracy
± 0.25%
Full scale pressure ≥ 2” H2O
High Accuracy Option
± 0.125%
Repeatability ± 0.08% Full Scale
Zero Shift and Span Shift 0.02% Full Scale / ºCelsius
Operating Range / Turndown Ratio 0.5% to 100% Full Scale / 200:1 Turndown
Excess Pressure 128% FS Measurable
Burst Pressure 3 X Full Scale
Typical Response Time 1 5 ms (Adjustable)
Warm-up Time < 1 Second
1. Volumes, feed pressures, exhaust pressures and line sizing will determine the limits of response times.
Operating Conditions P-Series Gauges
Gas Compatibility Compatible with all non-corrosive gases 1
Operating Temperature -10 to +50 ºCelsius
Common Mode Pressure
(Differential Pressure Units Only)
200 psig
Mounting Attitude Sensitivity None
Ingress Protection IP40
Wetted Materials
302 & 303 Stainless Steel, Viton®. Silicone RTV, Silicon, Glass.
If your application demands a different material, please contact Alicat.
1. For aggressive gases, please see our PS-Series pressure Gauges. For use with water or other liquids please
contact Alicat
Communication / Power P-Series Gauges
Monochrome LCD or Color TFT Display
with integrated touchpad
Displays Pressure
Digital Output Signal 1 Options RS-232 Serial / RS-485 Serial / PROFIBUS 3
Analog Output Signa
l 2
Options 0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA
Optional Secondary Analog Output Signal 2 0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA
Electrical Connection Options 8 Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6 pin locking
Supply Voltage 7-30 Vdc (15-30 Vdc for 4-20 mA outputs)
Supply Current 0.040 Amp
1. The Digital Output Signal communicates Pressure
2. The Analog Output Signal and Optional Secondary Analog Output Signal communicate Pressure
3. If selecting PROFIBUS, no analog signal is available. PROFIBUS units do not have the display. See PROFIBUS
specifications for PROFIBUS supply voltages and currents. ( www.alicat.com/profibus)
Mechanical Specifications
Pressure Product Mechanical Dimensions Process Connections
1
P-Series Gauges 4.1”H x 2.4”W x 1.1”D 1/8” NPT Female
1. Compatible with Beswick®, Swagelok® tube, Parker®, face seal, push connect and compression adapter fittings. VCR and
SAE connections upon request.
Select One Unit of Measure when Ordering
PSIA inHG Atm
PSIG inH
2
O Torr
mmHG mBar kPa
Standard Available Ranges
P-Series Gauges
-15 psig to 0 psig
2 inH
2
OD 2 inH
2
OG
4 inH
2
OD 4 inH
2
OG
1 psid 1 psig
5 psid 5 psig
15 psid 15 psig 15 psia
30 psid 30 psig 30 psia
100 psid 100 psig 100 psia
150 psid 300 psig 300 psia
500 psig 500 psia
Other ranges available. Please contact Alicat.