Alliance Laundry Systems CI 2050/325 - Manual (Page 29)

29
4
There is an overheat problem (more than 190° detected).
There is a short circuit in the temperature sensor 1.
There is a broken wire in the temperature sensor 1.
Cool down situation
The foot pedal is pressed and there is an overheat situation.
Important
The foot pedal has to be released as soon as possible. It is possible that
linen in the ironer or the belts of the ironer will be damaged by burning if the
machine is not quick started up again.
After 30 seconds, the roll will start again automatically.
There is an overheat problem (more than 190° detected).
There is a short circuit in the temperature sensor 2.
There is a broken wire in the temperature sensor 2.