Alliance Laundry Systems CI 2050/325 - Manual (Page 57)

57
7
Weekly maintenance
Waxing
To prevent laundry from adhering to the ironing roller and to avoid corrosion of the ironing roller, this roller has
to be "waxed“ every week. Follow the instructions below.
Important
Only use a normal sheet or table-cloth for a grease cloth.
Set the machine to 150°C and with a speed of 1.6 mtr. per minute. Take a grease cloth and check its state.
If the grease cloth has sufficient wax, you can feed the cloth. The width of the grease cloth has to be equal to
the width of the feeding conveyor, otherwise, the ironing roller will not be fully waxed.
If the machine is not going to be used for a longer period, you have to wax the ironing roller.
With this waxing, you can prevent the ironing roller from being corroded during this particular period.
Monthly maintenance
Fan
The vapour exhaust fan on the left side of the machine will become filthy during operation. Check the fan on
this. By removing the left door, you can see the suction opening of the fan. Any filth accumulation is to be found
in the impeller of the fan. Remove this by means of the vacuum cleaner.
While cleaning this part, do not forget to clean the frame space.
fan
fan impeller