Alliance Laundry Systems CI 2050/325 - Manual (Page 37)

37
5
Adjustments of the machine
Guiding ironing belts
The ironing belts are guided by plates on a beam, which is placed between the ironing belts.
On the outlet side, a beam, which has a fixed position, guides these ironing belts
(see 1 on the picture below).
There is also a beam on the back side of the machine (see 2 on the picture below).
If the guiding of the ironing belts is not adjusted correctly, it will effect the life of the ironing belts in a
negative way. If the ironing belts have been dismounted/replaced, you have to recheck the guiding of
the ironing belts. Beam 2 can be reached if you remove the plating on the rear side of the machine.